Chimney Capping, Repairs & Removal: Leaks Stopped at the Source

A chimney takes the worst of the weather up high. We repoint, reflash, rebuild or remove it, and stop the leaks at the source.

Chimneys cause more than their fair share of roof leaks. They sit highest on the roof, take the full force of wind and rain, and their mortar and lead fail over the years. A damp patch on the chimney breast, a cracked pot, or crumbling flaunching. These are all signs the stack needs attention before water gets into your home.

We repoint, reflash, cap, rebuild and remove chimneys across Hampshire and Surrey. Whether yours needs a tidy-up or a full rebuild, we'll tell you straight what's involved. And if you no longer use the chimney at all, taking the stack down below the roofline is often the simplest way to end the leaks for good.

What We Do

What We Do

Chimney repointing

Mortar joints in the stack crack and crumble in the frost. We cut out the loose mortar and repoint to seal the brickwork.

Chimney flashing

Where the chimney meets the roof, lead flashing keeps water out. We renew and repair flashing that's lifted, split or pulling away.

Chimney stack repairs and rebuilds

From a cracked brick to a stack that's leaning, we repair and rebuild stacks so they're sound and stable.

Chimney capping, flaunching and pots

Capping seals the top of the stack so rain stops soaking down through the brickwork. We renew the mortar cap (the flaunching), fit chimney caps and cowls, and replace cracked or missing pots. If the flue is no longer in use, a capped stack keeps the weather out and still lets the brickwork breathe.

Chimney removal

If you no longer use the chimney, we can take the stack down and tile over, ending the leaks and the upkeep for good.

Warning Signs

When to Call Us

  • Damp or water marks on the chimney breast inside the house
  • Mortar crumbling or dropping out of the chimney stack
  • A chimney pot that's cracked, loose or missing
  • Lead flashing lifting or pulling away from the stack
  • The stack is leaning, cracked or unstable
  • You no longer use the chimney and want the leaks gone for good
The Process

How It Works

01

Free survey

We come out, take a proper look from the roof and inside, and explain what we find in plain English.

02

Clear written quote

You get a written quote that sets out the work and the price, no surprises, no pressure.

03

Work carried out

We do the job properly with the right materials, keeping you in the loop as we go.

04

Tidy finish and sign-off

We clean up, check everything's sound, and walk you through the finished work.

Proof of Craft

Recent Work

Chimney stack with lead flashing repaired
Chimney and lead flashing repaired
Chimney stack assessed before repointing
Stack assessed before repointing
FAQs

Questions We Get Asked

Usually it's one of three things. Cracked mortar in the stack, failed lead flashing where the chimney meets the roof, or a damaged flaunching cap on top. Water runs down the brickwork and in through any gap. We'll get up there, find the exact entry point, and fix the cause rather than just treat the damp inside.

Looking for chimney repairs near you in Hampshire?

We're based in Fleet, so chimney work across Hampshire and Surrey is local to us. We cover Fleet, Church Crookham, Farnborough, Basingstoke, Reading, Andover and everywhere within 20 miles across Hampshire, Surrey and Berkshire. If you are not sure whether your road falls inside that, take a look at the areas we cover or just tell us where you are and we will say yes or no straight away.

Areas We Cover

and everywhere within 20 miles across Hampshire, Surrey and Berkshire. See all areas

Need a roofer you can trust?

Get a free, no-obligation quote.

Recent project completed in Basingstoke
Chat on WhatsAppCall Now, 07521 318047